LSBX | ★★ Plymouth-series
LSBX | ★★ Plymouth-series

LSBX | ★★ Plymouth-series

LSBX150-50-1 (H)

For competitive quote, log in to the portal and request a Special Project Quote

PRODUCT OVERVIEW

The luxoⒶRCH Plymouth-series area light shoebox luminaire is constructed of die-cast aluminum housing, optimized for protection against moisture and environmental contaminants and engineered for efficient product maintenance. 

With multiple mounting options and an industry leading 5Year, 50,000hr warranty, the LSBX-collection is ideal for outdoor area lighting.

Documentation Downloads

LSBX-plymouth-feat

KEY FEATURES

  • Low Profile, Rugged One-Piece Die Cast Aluminum Housing
  • 3G Vibration Rated Compact Design Minimizes Wind Load Requirements 
  • 100,000hr LED Lifespan Based on IES LM-80 and TM-21 Calculations 
  • Dark Sky Conforming Optics Available in IES Type III, IV, or V 
  • Scalable Lumen Packages, Replacing Up To 1000W MH 
  • Optional Photocell and Occupancy Sensors Available

PHYSICAL FEATURES

Heavy Duty Construction

  • Engineered with heavy-duty cast aluminum housing that is completely sealed against moisture and environmental contaminants.
  • Features a single-latch removable door for quick-access to driver components
  • 3G vibration rated for harsh environmental applications

Advanced Optics

  • Outstanding versatility in Type-III, IV, and V IES distributions
  • Optics conforms to dark sky requirements and maximizes efficiency and installation spacing

Robust Electronics

  • The driver is rack-mounted to the aluminum housing for optimal heat sinking
  • The driver is rack-mounted to the aluminum housing for optimal heat sinking
  • 1-10V dimming is standard with optional 10kV/10kA common-/differential-mode surge protection
  • Meets DLC Premium certification requirements

Lifespan

  • 100,000hr LED Lifespan Based on IES LM-80 and TM-21 Calculations
  • Industry leading 10-Year, 100,000hr warranty

ORDERING GUIDE

Model Series

Watt (W)

CCT (K)

Voltage (V)

Mount

 

 

 

 

 

LSBX | LED Shoebox

150 | 150W
300 | 300W

40 | 4000K
50 | 5000K

1 | 120-277V
H | 200-480V

Blank | None *
     A | Slip-Fitter
     
B | Square/Round-Pole

 

 

 

 

 

  • Default option

Choose Your Model Specifications Above:

LSBX

150

50

H

Blank

Example Ordering Number: LSBX150-50-1 (H)

KEY SPECIFICATIONS

  • Housing: Thermally conductive rugged one-piece die cast aluminum 
  • Operating temp: -40°F—115°F
  • Input Voltage: 120-277Vac
  • IP: UL Wet Location Listed
  • PF: >0.9 Non-Flicker
  • Efficacy: >125LM/W
  • Dimming: 1-10V
  • THD: <20%
  • CRI: >70

APPLICATIONS
TITAN_APP

CERTIFICATIONS
Certifications

STANDARD WARRANTY*
5YRS

* Extended warranty available

MODEL SPECIFICATIONS

Model

Watt

Lumens

Voltage

CCT

LPW

Replaces

LSBX150

150W

19,000LM

100-277V

4000K

5000K

126LM/W

400W MH

LSBX300

300W

38,200LM

125LM/W

1000W MH

SIZING & MEASUREMENTS

Model

Model

150W

300W

LSBX-dim1

LSBX-dim2

LSBX-dim3

LSBX-dim4

 

 

LIGHT DISTRIBUTION OPTIONS

Type III

Type III optics produces an asymmetrical pattern that directs the majority of the light forward and equally on both sides of the luminaire.  In a back-to-back configuration, it creates a rectangular pattern which can extend pole spacings.

LSBX-III

Type IV

Type IV is suitable for applications where light is primarily required to forward with minimal backlight. Typical installations include perimeter poles

LSBX-IV

Type V

Type V optics produce a symmetrical square distribution pattern that distributes light equally on all sides of the luminaire. Type V luminaries provides utility for most area lighting applications.

LSBX-V

 PLEASE READ ALL INSTRUCTIONS BEFORE ATTEMPTING INSTALLATION

  • Please read the product specification carefully first to confirm that the working environment is in line with the condition on the specification before it is used. 
  • Please confirm the input voltage and frequency before use. 
  • The light must be installed by professional personnel 
  • If the power cord and case of the products are damaged, it will be regarded as disqualified product and should not be used. 
  • If external soft cable or wire of the product is damaged, the wire should be replaced by manufacturer or service agent or personnel with similar qualification to avoid danger.
  • This luminaire is designed to operate in ambient temperatures ranging from -40°F to 150°F and to be horizontally mounted facing down.
  • This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
  • This product is not available for several special environments, such as places with corrosive gas liquids or high pressure water vapor. 
  • CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR
  • CAUTION - RISK OF FIRE

Square/Round Pole (Figure 1)

Slip-Fitter (Figure 2)

Wall-Mount (Figure 3)

Figure 1

Figure 2

Figure 3

LSBX-install-1

LSBX-install-2

LSBX-install-3

  • Remove the side plate from mounting bracket. Please skip to step 3 if mounted onto the square Pole. 
  • Attach round pole mounting plate on mounting bracket.
  • Route the cord into mounting bracket through the hole for wiring, slide the fixture onto the bracket and tighten 2 bottom screws.
  • Slightly drag the wires to make sure the hole on bracket is sealed by silicon gasket.
  • Make wiring connection as per wire diagram below, replace the side plate and fasten screws. 

 

  • Connect the wires to L/N/GND
  • Remove the cover and adjust the bracket to the desired angle
  • Install the bracket on the pole and fix it with screws
  • Remove the side plate by loosen the screws.
  • Fix the back plate onto the arm bracket with screws provided.
  • Use the metal template provided to locate footprint on the wall to drill the holes, then fix the bracket on the wall with screws.
  • Route the power cord into wall mount bracket, slide the fixture onto the mounting bracket, then tighten bottom screws.
  • Make wiring connection inside of bracket and replace the side plate with screws.

For Sales Rep

The REP portal will enable sales reps to see pricing & availability:

Rep Portal

For Customers

The customer portal will only allow customers to see open orders, invoices and customer statements:

Customer Portal